4 photosFUQ3532AB Encoder Modulator 32 CVBS-256 IP Inputs
The Hanxing FUQ3532AB is an encoder-modulator in the FUQ3 line, built in our Guangzhou headend factory. Published specifications: Encoding MPEG4 AVC/H.264 HP/MP/BP; Bit-rate 1Mbps~5Mbps each channel; Audio: Encoding MPEG-1 Layer 2. 11 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
Our FUQ-3532AB encoder modulator is built for DTV broadcasting around 32 CVBS and 256 IP inputs, with 8 MPTS IP and 8 RF outputs. Encoding and modulation run on MPEG-4 AVC/H.264 with DVB-C/T. Every unit is built on our own line in Guangzhou. Deployed in DTV broadcasting systems.
- Encoding
- MPEG4 AVC/H.264 HP/MP/BP
- Bit-rate
- 1Mbps~5Mbps each channel
- Audio Encoding
- MPEG-1 Layer 2
- Audio Sampling rate
- 48kHz
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ3532AB. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Encoding | MPEG4 AVC/H.264 HP/MP/BP |
|---|---|
| Bit-rate | 1Mbps~5Mbps each channel |
| Rate Control | CBR/VBR |
| GOP Structure | IPP(P frame is adjustable) |
| Audio: Encoding | MPEG-1 Layer 2 |
| Audio: Sampling rate | 48kHz |
| Audio: Resolution | 24-bit |
| Audio Gain | 0-255 adjustable |
| Audio: Bit-rate | 64/128/192/224/256/320/384Kbps each channel |
| DVB-T | EN300744 |
| Connection | Local/remote connection |
FUQ3532AB datasheet
Our full FUQ3532AB datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ3532AB — quick answers
Direct answers about the Hanxing FUQ3532AB: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ3532AB?
Our FUQ-3532AB encoder modulator is built for DTV broadcasting around 32 CVBS and 256 IP inputs, with 8 MPTS IP and 8 RF outputs.
What is the FUQ3532AB used for in a hotel or hospital coax network?
Headends that feed a coax RF network directly from HDMI or SDI sources — hotels, hospitals, campuses and small cable systems.
What is the price of the FUQ3532AB, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
Which encoding formats does the FUQ3532AB support?
Encoding: MPEG4 AVC/H.264 HP/MP/BP
What bit rate does the FUQ3532AB support?
Bit-rate: 1Mbps~5Mbps each channel
Which interfaces does the FUQ3532AB have?
Connection: Local/remote connection
Is the FUQ3532AB datasheet available?
Yes — the datasheet we publish for the FUQ3532AB is on this page and can be opened or downloaded directly.
Typical use
Headends that feed a coax RF network directly from HDMI or SDI sources — hotels, hospitals, campuses and small cable systems.
- Broadcast headends
More from this range
All Encoder Modulator models
Next stage in the chain
An encoder modulator puts the signal on one RF carrier at one point of the network. When that single carrier has to reach a whole town rather than a building, the next stage is a DVB-T transmitter: it takes the same transport stream and raises it to the output power the coverage plan needs.
Get a quote for the FUQ3532AB
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.