Product catalogue · Transmitter / Receiver
DVB-T and FM Broadcast Transmitters
These are the transmission stages: DVB-T or multi-standard exciters and amplifiers that put a headend’s output on air, and FM stereo transmitters for radio. The line is chosen by output power, output interface and whether the site is a main station, a gap filler or an emergency backup path.
Hanxing builds 10 transmitter / receiver models. A transmitter amplifies a modulated signal to the power an antenna system needs to cover its service area, and is specified by output power, frequency range and output interface. In a DTT network it follows the modulator or exciter; in FM broadcast it takes the audio and stereo multiplex directly.
- Models
- 10
- Datasheets
- 10
- Deployments cited
- 1
What does a DVB-T or FM transmitter do in DTT coverage or FM stereo broadcast?
A transmitter amplifies a modulated signal to the power an antenna system needs to cover its service area, and is specified by output power, frequency range and output interface. In a DTT network it follows the modulator or exciter; in FM broadcast it takes the audio and stereo multiplex directly.
How do I choose a transmitter power and interface?
Start from the coverage you must deliver and work back: the required field strength sets the output power, the antenna system sets the output interface and impedance, and the site sets the cooling and machine-room conditions. The published output power, frequency range and connector of each model are in the table below.
Where are these transmitters deployed?
The deployment fields below are the ones this range’s model pages publish, counted across the line: terrestrial TV broadcasting, single-frequency network deployment, emergency backup transmission and FM stereo radio sites that need a defined output power and defined machine-room conditions.
- Terrestrial TV broadcasting1
Where this range sits in a system
Each link opens the turnkey chain on our system solutions page that this range feeds into — model, role and the parameters published for it.
How does the transmitter / receiver line differ from the neighbouring lines?
Each row below is the application copy already published for that product line on this site. Read the row that matches the signal you have in hand, then open the line it points to.
| Product line | What it is specified for |
|---|---|
| Transmitter / Receiver (this page) | Terrestrial and FM transmission — DVB-T coverage for regional networks and FM stereo broadcast from 10 W to 10 kW. |
| Modulator / Modem | Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups. |
| Other Devices | Supporting headend hardware — capture, processing, analysis and interfacing devices used alongside the encoder and modulator line. |
| Encoder Modulator | Headends that feed a coax RF network directly from HDMI or SDI sources — hotels, hospitals, campuses and small cable systems. |
Models in the Transmitter / Receiver range
All 10 models of this line, with the specifications each model page publishes from its own datasheet. Every model name links to its page, where the full table, the datasheet (Word) and the range comparison sit.
What does this range publish across all its models?
Standards, output interfaces and output power ratings published across this range
The values below are the rows published on this range's own model pages, deduplicated. The count next to each value is the number of models in the line that publish it, so you can see where the range is concentrated before you open a single model page.
| Published value | Models publishing it |
|---|---|
| 10W, 20W, 30W, 50W, 100W Optional | 1 |
| 200W/300W/400W/500W/600 W Optional | 1 |
| DVB-T/ATSC/ISDB-T | 1 |
| support 4/16/32/64 QAM mode | 1 |
Transmitter / Receiver — buyer questions
What is a DVB-T or FM transmitter used for in DTT coverage or FM stereo broadcast?
Terrestrial and FM transmission — DVB-T coverage for regional networks and FM stereo broadcast from 10 W to 10 kW.
Which standards and output power ratings does this transmitter range cover?
The catalogue lists 10 Transmitter / Receiver models, and 10 of them carry a Word datasheet on this site. Standards, output interfaces and output power ratings published across this range: 10W, 20W, 30W, 50W, 100W Optional (1); 200W/300W/400W/500W/600 W Optional (1); DVB-T/ATSC/ISDB-T (1); support 4/16/32/64 QAM mode (1) — the figures in brackets are the number of model pages in this range that publish that value. If a parameter you need is not published on the model page, ask us and we send it with the datasheet instead of estimating it.
What frequency range, output interface and machine-room conditions do these transmitters need?
It is specified per model rather than per line. The datasheets published on this range's model pages state a power or consumption row for 7 of the 10 models (for example FUQ8313 — Output: variation of output power: ±0.25dB); a chassis dimension row for 2 of them (for example FUQ8313 — Dimension(L×W×H): 850mm×600mm×1695mm). Tell us the model you have shortlisted and we send the datasheet with the drawing, so power, rack space and connectors are confirmed before you order.
What is the lead time, and how do I get a price?
Quotations are factory-direct. Send the model number, or the channel count with the input and output formats you need, and we answer with the datasheet, the configuration and a written quotation. Lead time depends on the model and the position in our production schedule and is confirmed in the quotation, together with the air or sea freight options.
Get a quotation for the Transmitter / Receiver line
Send the model number from the table above, or the channel count with the input and output formats you need. We come back with the datasheet, the configuration and factory-direct pricing — by email, phone or WhatsApp, whichever you prefer.
Prefer to reach us directly? The WhatsApp, phone and email links are at the foot of this page.