FUQ4475 IP QAM Modulator 512 IP Inputs 64 QAM Dual
The Hanxing FUQ4475 is an RF modulator in the FUQ4 line, built in our Guangzhou headend factory. Published specifications: Input: Transport Protocol TS over UDP/RTP, unicast and multicast; Input: Transmission Rate Max 840Mbps for each GE input; Input Channel 512. 18 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The Hanxing FUQ-4475 modulates IP into RF, taking up to 512 IP inputs across 6 GE ports. Dual RF interfaces carry 64 QAM carriers, produced through multiplexing, scrambling and DVB-C modulation. Management runs over the web, and buyers use it for broadcast headends and cable television distribution systems.
- Input
- Max 512 IP inputs from 6*10 0…
- Input: Transport Protocol
- TS over UDP/RTP
- Input: Transmission Rate
- Max 840Mbps for each GE input
- Input Channel
- 512
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ4475. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Input | Max 512 IP inputs from 6*10 0/1000M Ethernet Port (4*RJ45, 2*SFP) |
|---|---|
| Input: Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
| Input: Transmission Rate | Max 840Mbps for each GE input |
| Input Channel | 512 |
| Max PIDs | 256 per channel |
| Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 |
| Connection | Local/remote connection |
| Modulation Standard | EN300 429/ITU-T J.83A/B/C |
| Constellation | Constellation :16/ 32/64/128/256Q AM |
| QAM Channel | 64 non-adjacent carriers 384Mbps bandwidth for each RF interface |
| Symbol Rate | 5.0~7.0Msps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM) |
| Interface | 2 F type output ports for 64 carriers, 75Ω |
| RF Range | 50~960MHz, 1kHz stepping |
| Output Level | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| MER | ≥ 40dB |
| General: Demission | 420mm×440mm ×44.5mm (WxLxH) |
| General: Temperature | 0~45℃ (operation), -20~80℃ (storage) |
| General: Power Supply | AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz |
FUQ4475 datasheet
Our full FUQ4475 datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ4475 compares
FUQ4475 beside 2 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ4475 this model | FUQ44105B | FUQ41013K |
|---|---|---|---|
| Inputs | Max 512 IP inputs from 6*10 0/1000M Ethernet Port (4*RJ45,… | — | 2 DVB-S/S2/S2X Tuners |
| Standard | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | — |
| Interface | Local/remote connection | Local/remote connection | — |
| RF output | 50~960MHz, 1kHz stepping | -20~+10dBm(87~107 dBµV), 0.1dB step | — |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ4475 — quick answers
Direct answers about the Hanxing FUQ4475: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ4475?
The Hanxing FUQ-4475 modulates IP into RF, taking up to 512 IP inputs across 6 GE ports.
What is the FUQ4475 used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ4475, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ4475 accept?
Input: Max 512 IP inputs from 6*10 0/1000M Ethernet Port (4*RJ45, 2*SFP)
What are the outputs of the FUQ4475?
Output Level: -20dBm~+10dBm(87~117dBµV), 0.1dB stepping
Which modulation does the FUQ4475 use?
Modulation Standard: EN300 429/ITU-T J.83A/B/C
What bit rate does the FUQ4475 support?
Symbol Rate: 5.0~7.0Msps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM)
Which interfaces does the FUQ4475 have?
Connection: Local/remote connection
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- Cable TV
- Broadcast headends
- CAS & scrambling
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ4475
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.