FUQ4353 Dual-Channel Encoder
The Hanxing FUQ4353 is a video encoder in the FUQ4 line, built in our Guangzhou headend factory. Published specifications: Video 4:2:0; Audio MPEG1 Layer II;MPEG 2-AAC; MPEG 4-AAC; Video (HDMI) MPEG2; MPEG4 AVC/H.264. 10 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
We make the FUQ-4353 dual-channel encoder for HD and SD MPEG-2 and H.264 video with MP2/AAC/AC3 audio. Pluggable HDMI/3G-SDI/YPbPr+CVBS inputs feed ASI re-muxed outputs (MPTS/SPTS) or IP streams over UDP/RTP. PSI/SI editing and web-based NMS run on the 1RU rack-mount chassis, and units ship factory-direct from our Guangzhou factory. Typical deployments: broadcast and IPTV workflows.
The full specification table for the FUQ4353 is in the datasheet we publish — tell us what you need and we will confirm it against the unit we build.
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ4353. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Video | 4:2:0 |
|---|---|
| Audio | MPEG1 Layer II;MPEG 2-AAC; MPEG 4-AAC and Dolby Digital AC3 2.0 |
| Video (HDMI) | MPEG2; MPEG4 AVC/H.264 |
| Audio (HDMI) | MPEG1 Layer II,MPEG2-AAC, MPEG4-AAC and Dolby Digital AC3 2.0 |
| Video (YpbPr/ CVBS) | MPEG2; MPEG4 AVC/H.264 |
| Audio (YpbPr/ CVBS) | MPEG1 Layer II; MPEG2-AAC; MPEG4-AAC and Dolby Digital AC3 2.0 |
| General: System | 2 ASI out (BNC type, same one TS, mirror as MPTS or SPTS) |
| System | Web NMS |
| General: R System | IP (1 MPTS & 2 SPTS) over UDP, RTP/RTSP (RJ45, 1000M) |
| General: Physical Specification | 100~240VAC, 50/60Hz |
FUQ4353 datasheet
Our full FUQ4353 datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ4353 — quick answers
Direct answers about the Hanxing FUQ4353: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ4353?
We make the FUQ-4353 dual-channel encoder for HD and SD MPEG-2 and H.264 video with MP2/AAC/AC3 audio.
What is the FUQ4353 used for in an IPTV or hotel TV system?
Streaming and broadcast headends that need to turn HDMI or SDI sources into IP streams — IPTV platforms, hotel in-room TV, live event contribution, cable and DTT distribution.
What is the price of the FUQ4353, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
Which encoding formats does the FUQ4353 support?
Video (HDMI): MPEG2; MPEG4 AVC/H.264
Is the FUQ4353 datasheet available?
Yes — the datasheet we publish for the FUQ4353 is on this page and can be opened or downloaded directly.
Typical use
Streaming and broadcast headends that need to turn HDMI or SDI sources into IP streams — IPTV platforms, hotel in-room TV, live event contribution, cable and DTT distribution.
- IPTV platforms
- OTT & streaming
- Cruise & marine
- Broadcast headends
More from this range
All Encoder models
Next stage in the chain
An encoder hands the headend a transport stream; the next decision is what that stream joins. The multiplexer builds the MPTS line-up, rewrites PSI/SI and applies scrambling, so it is the stage that decides which channels a set-top box or smart TV actually sees.
Get a quote for the FUQ4353
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.