2 photosFUQ4354 Transcoder Single Channel 32 IP Streams 2
The Hanxing FUQ4354 is an IRD / decoder / transcoder in the FUQ4 line, built in our Guangzhou headend factory. Published specifications: Power requirements AC 200V-240V, 50/60Hz, 2A; Video AVS+ HD → MPEG2/H.264 HD AVS+ HD →; Rate Control CBR/VBR. 9 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The FUQ-4354 is a single-channel transcoder we build with demodulation, descrambling, decoding and transcoding in one chassis. It takes 2 tuners with CAM/CI slots, ASI and 32 IP streams (UDP/RTP), with optional DVB-C/T/S2/ATSC demodulation on board. Any-to-any conversion between AVS+ and H.264/MPEG-2 covers SD and HD, including HD-to-SD downscaling. Control runs over web NMS. Broadcast operators use it to handle multi-format H.264, MPEG-2 and AVS+ video across their networks.
- Power requirements
- AC 200V-240V
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ4354. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Mode 0, Mode1, Mode | Mode 0, Mode1, Mode E |
|---|---|
| Video | AVS+ HD → MPEG2/H.264 HD AVS+ HD → MPEG2/H.264 SD AVS+ SD → MPEG2/H.264 SD |
| Rate Control | CBR/VBR |
| Audio Output | 1*Stereo /2*mono, HDMI/SDI |
| Audio Sampling | 48kHz |
| General: Dimensions | 430mm×405mm×45mm (WxDxH) |
| General: Approx weight | 4.8 Kg |
| General: Temperature range | 0~45℃ (operation), -20~80℃ (storage) |
| Power requirements | AC 200V-240V, 50/60Hz, 2A |
FUQ4354 datasheet
Our full FUQ4354 datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ4354 — quick answers
Direct answers about the Hanxing FUQ4354: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ4354?
The FUQ-4354 is a single-channel transcoder we build with demodulation, descrambling, decoding and transcoding in one chassis.
What is the FUQ4354 used for in satellite turn-around and monitoring?
Receiving, descrambling, decoding and transcoding satellite or IP feeds — turn-around, monitoring and contribution links.
What is the price of the FUQ4354, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What power supply does the FUQ4354 need?
Power requirements: AC 200V-240V, 50/60Hz, 2A
What are the physical dimensions of the FUQ4354?
General: Dimensions: 430mm×405mm×45mm (WxDxH)
Is the FUQ4354 datasheet available?
Yes — the datasheet we publish for the FUQ4354 is on this page and can be opened or downloaded directly.
Typical use
Receiving, descrambling, decoding and transcoding satellite or IP feeds — turn-around, monitoring and contribution links.
- OTT & streaming
- Broadcast headends
- CAS & scrambling
More from this range
All IRD / Decoder / Transcoder models
Next stage in the chain
An IRD receives, descrambles and converts a feed; the output usually has to be combined with other sources before it is distributed. That combination, including PSI/SI handling and scrambling, is the multiplexing stage, and it is what the receiver output is normally handed to.
Get a quote for the FUQ4354
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.