2 photosFUQ4619B ASI to IP Gateway 8-Channel ASI Input 1 GE IP Output
The Hanxing FUQ4619B is an IP gateway in the FUQ4 line, built in our Guangzhou headend factory. Published specifications: Transmission Bit-rate Maximum total bit-rate is 400Mbps—256 SPTS; General: Dimension(WxLxH) 482mm×410mm×44mm; General: Weight 3.6kg. 6 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
We build the FUQ-4619B ASI to IP gateway, which converts 8x ASI signals into IP streams over UDP/RTP/RTSP. BISS Mode 1/E descrambling runs on the input side, and SPTS outputs run in 256/32/20 modes at up to 800Mbps through 1 GE port. A 1RU rack-mount chassis takes dual control through LCD/keyboard or SNMP/Web. Satellite content distribution and multi-platform IPTV headends are where buyers put it.
The full specification table for the FUQ4619B is in the datasheet we publish — tell us what you need and we will confirm it against the unit we build.
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ4619B. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Transmission Bit-rate | Maximum total bit-rate is 400Mbps—256 SPTS output |
|---|---|
| General: Dimension(WxLxH) | 482mm×410mm×44mm |
| General: Weight | 3.6kg |
| General: Temperature | 0~45℃ (work), -20~80℃ (storage) |
| General: Power supply | 100~240VAC, 50/60Hz |
| General: consumption | 20W |
FUQ4619B datasheet
Our full FUQ4619B datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ4619B — quick answers
Direct answers about the Hanxing FUQ4619B: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ4619B?
We build the FUQ-4619B ASI to IP gateway, which converts 8x ASI signals into IP streams over UDP/RTP/RTSP.
What is the FUQ4619B used for between an IP backbone and an ASI or RF leg?
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
What is the price of the FUQ4619B, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What power supply does the FUQ4619B need?
General: consumption: 20W
What are the physical dimensions of the FUQ4619B?
General: Dimension(WxLxH): 482mm×410mm×44mm
Is the FUQ4619B datasheet available?
Yes — the datasheet we publish for the FUQ4619B is on this page and can be opened or downloaded directly.
Typical use
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
- IPTV platforms
- Satellite turn-around
- OTT & streaming
- Broadcast headends
- CAS & scrambling
More from this range
All IP Gateway models
FUQ4618PX x Modular IP to ASI Gateway 512 SPTS-MPTS Input UDP-RTP
FUQ4618RY y IP to ASI Gateway 12-Channel IP Input UDP Output DVB-ASI
FUQ4618SY 12-Channel IP to ASI Gateway with Dual Gigabit Inputs/DVB-ASI
FUQ4619B ASI to IP Gateway 8 ASI Inputs to 20/32/256 SPTS Outputs
Next stage in the chain
A gateway moves programs between the IP backbone and the ASI or RF legs of a headend. What happens next depends on the destination: streams that continue as IP go to a multiplexer for re-mapping and scrambling before they are distributed to the network.
Get a quote for the FUQ4619B
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.