3 photosFUQ46610K TV Processor 6Channel AnalogDigital Input
The Hanxing FUQ46610K is a headend device in the FUQ4 line, built in our Guangzhou headend factory. Published specifications: Output: Shoulder level ≥57dB (for single channel); Output: Image rejection >70dB; Output: Spurious in band <-55dBc. 8 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The FUQ-46610K TV processor takes 6 channels of analog or digital signal through 470-860MHz RF input and delivers 48-960MHz RF output. It converts between DVB-C/T, ATSC and ISDB-T standards with configurable 6M/8M bandwidth. WEB-based management handles remote control and firmware updates in the 1RU rack-mount chassis. Typical deployments: cable headend modernization and multi-standard broadcast systems that need flexible signal conversion.
- Output: Shoulder level
- ≥57dB (for single channel)
- Output: Image rejection
- >70dB
- Output: Spurious in band
- <-55dBc
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ46610K. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| RF range | 48~960MHz, 1kHz step, 110M bandwidth for start-end channel |
|---|---|
| RF ATT | -25~-2 dBm, 0.5dBm step |
| Output: Shoulder level | ≥57dB (for single channel), ≥54dB (for 6 channels) |
| Output: Image rejection | >70dB |
| Output: Spurious in band | <-55dBc |
| General: Weight | 4 kg |
| General: Power Supply | AC 220V±10%,50/60Hz |
| General: Consumption | 27W |
FUQ46610K datasheet
Our full FUQ46610K datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ46610K — quick answers
Direct answers about the Hanxing FUQ46610K: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ46610K?
The FUQ-46610K TV processor takes 6 channels of analog or digital signal through 470-860MHz RF input and delivers 48-960MHz RF output.
What is the FUQ46610K used for alongside an encoder or modulator line?
Supporting headend hardware — capture, processing, analysis and interfacing devices used alongside the encoder and modulator line.
What is the price of the FUQ46610K, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What are the outputs of the FUQ46610K?
Output: Shoulder level: ≥57dB (for single channel), ≥54dB (for 6 channels)
What is the RF output of the FUQ46610K?
RF range: 48~960MHz, 1kHz step, 110M bandwidth for start-end channel
What power supply does the FUQ46610K need?
General: Consumption: 27W
Is the FUQ46610K datasheet available?
Yes — the datasheet we publish for the FUQ46610K is on this page and can be opened or downloaded directly.
Typical use
Supporting headend hardware — capture, processing, analysis and interfacing devices used alongside the encoder and modulator line.
- Cable TV
- Broadcast headends
More from this range
All Other Devices models
Next stage in the chain
Processing units in this range clean up, re-clock or re-package a signal before it is distributed. The output still needs a carrier to reach coax networks, so the modulator stage is the usual next step once the processing chain is defined.
Get a quote for the FUQ46610K
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.