2 photosFUQ-10 IP Gateway 8-12 HD SD Program IP Input SRT HTTP UDP RTP
The Hanxing FUQ-10 is an IP gateway in the FUQ1 line, built in our Guangzhou headend factory. Published specifications: General: Power Supply AC100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz. 2 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
Our FUQ-10 IP gateway converts between SRT, HTTP, UDP, RTP/RTSP, HLS and RTMP while carrying 8-12 HD/SD programs at 8Mbps each. Anti-jitter processing runs over dual Ethernet ports, 1×I/O and 1×low-bitrate input. The 180×110×40mm industrial chassis is managed through web-based NMS and runs in 0-45°C environments, for broadcast contribution and multi-platform IPTV distribution.
The full specification table for the FUQ-10 is in the datasheet we publish — tell us what you need and we will confirm it against the unit we build.
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ-10. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| General: Power Supply | AC100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz |
|---|---|
| Bit-Rate | Programs |
FUQ-10 datasheet
Our full FUQ-10 datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ-10 — quick answers
Direct answers about the Hanxing FUQ-10: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ-10?
Our FUQ-10 IP gateway converts between SRT, HTTP, UDP, RTP/RTSP, HLS and RTMP while carrying 8-12 HD/SD programs at 8Mbps each.
What is the FUQ-10 used for between an IP backbone and an ASI or RF leg?
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
What is the price of the FUQ-10, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
Is the FUQ-10 datasheet available?
Yes — the datasheet we publish for the FUQ-10 is on this page and can be opened or downloaded directly.
Typical use
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
- IPTV platforms
- Live events
- OTT & streaming
- Broadcast headends
More from this range
All IP Gateway models
Next stage in the chain
A gateway moves programs between the IP backbone and the ASI or RF legs of a headend. What happens next depends on the destination: streams that continue as IP go to a multiplexer for re-mapping and scrambling before they are distributed to the network.
Get a quote for the FUQ-10
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.