2 photosFUQ-NEP10 IP Gateway 8-12 HD-SD Program Conversion
The Hanxing FUQ-NEP10 is an IP gateway in the FUQN line, built in our Guangzhou headend factory. Published specifications: General: Power Supply AC100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz. 2 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The FUQ-NEP10 is our IP gateway for moving broadcast IP streams between SRT, HTTP, UDP, RTP, RTSP and HLS, with RTMP output. It handles 8-12 concurrent HD/SD programs at 8Mbps and applies IP anti-jitter technology. Dual Ethernet ports (1x full I/O, 1x low-bitrate input) keep the layout flexible, and everything is managed through web-based NMS in a 1RU chassis. Typical deployments: multi-screen IPTV headends and hybrid broadcast-OTT systems.
The full specification table for the FUQ-NEP10 is in the datasheet we publish — tell us what you need and we will confirm it against the unit we build.
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ-NEP10. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| General: Power Supply | AC100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz |
|---|---|
| Bit-Rate | Programs |
FUQ-NEP10 datasheet
Our full FUQ-NEP10 datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
FUQ-NEP10 — quick answers
Direct answers about the Hanxing FUQ-NEP10: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ-NEP10?
The FUQ-NEP10 is our IP gateway for moving broadcast IP streams between SRT, HTTP, UDP, RTP, RTSP and HLS, with RTMP output.
What is the FUQ-NEP10 used for between an IP backbone and an ASI or RF leg?
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
What is the price of the FUQ-NEP10, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
Is the FUQ-NEP10 datasheet available?
Yes — the datasheet we publish for the FUQ-NEP10 is on this page and can be opened or downloaded directly.
Typical use
Interfacing between IP and ASI/RF legs of a headend — multicast to ASI conversion, IP backbones, and satellite or terrestrial feeds.
- IPTV platforms
- OTT & streaming
- Broadcast headends
More from this range
All IP Gateway models
Next stage in the chain
A gateway moves programs between the IP backbone and the ASI or RF legs of a headend. What happens next depends on the destination: streams that continue as IP go to a multiplexer for re-mapping and scrambling before they are distributed to the network.
Get a quote for the FUQ-NEP10
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.