2 photosFUQ200A 10G IP QAM Processor 64-128 DVB-C QAM
The Hanxing FUQ200A is an RF modulator in the FUQ2 line, built in our Guangzhou headend factory. Published specifications: Input: Transmission Rate Max 9600Mbps for each 10G SFP+/SFP input; Input: Transport Protocol TS over UDP/RTP, unicast and multicast; Constellation Bandwidth :8M. 17 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The Hanxing FUQ200A combines a multiplexer, scrambler and modulator to deliver up to 128 DVB-C QAM channels over RF ports. Inputs arrive through SFP+ ports as TS over UDP/RTP and multicast. We fit 1 (or 2) 64ch QAM cards in a 1U chassis, each card with dual RF output ports that broaden QAM carrier bandwidth. Web-based management keeps control simple, and the high density helps operators save cost.
- Input: Transmission Rate
- Max 9600Mbps for each 10G SFP…
- Input: Transport Protocol
- TS over UDP/RTP
- Output Level
- -20dBm~+10dBm(87~117dBµV)
- Constellation
- Bandwidth :8M
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ200A. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Input: Transmission Rate | Max 9600Mbps for each 10G SFP+/SFP input |
|---|---|
| Input: Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
| Max PIDs Remapping | 256 per output channel |
| Functions | PID remapping (auto/manually optional) |
| Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 |
| Scrambling: Connection | Local/remote connection |
| Constellation | Bandwidth :8M |
| FEC | RS (204, 188) |
| Interface (per card) | 2 F type output ports for 64 carriers, 75Ω Carrier 1~32 out thru RF1, 33~64 thru RF2 |
| RF Range | 50~960MHz, 1kHz stepping |
| Output Level | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| MER | ≥ 40dB |
| Per Daughter QAM Card | 64 IP output over UDP/RTP/RTSP, unicast/multicast, through SFP+/SFP ports 1-3 |
| Dimension | 420mm×440mm×44.5 mm (WxLxH) |
| General: S Temperature | 0~45℃ (operation), -20~80℃ (storage) |
| General: Power Supply | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz Redundancy power supply (optional as per order) |
| General: Consumption | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) |
FUQ200A datasheet
Our full FUQ200A datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ200A compares
FUQ200A beside 3 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ200A this model | FUQ200B | FUQ200B | FUQ200E |
|---|---|---|---|---|
| Inputs | Max 9600Mbps for each 10G SFP+/SFP input | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in throug… | Max 512 IP in per card through SFP+/SFP ports 1-3 | Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE… |
| Outputs | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Modulation | Bandwidth :8M | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C |
| Standard | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 |
| RF output | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping |
| Power | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) | 15.4W | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz |
| Dimensions | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ200A — quick answers
Direct answers about the Hanxing FUQ200A: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ200A?
The Hanxing FUQ200A combines a multiplexer, scrambler and modulator to deliver up to 128 DVB-C QAM channels over RF ports.
What is the FUQ200A used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ200A, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ200A accept?
Input: Transmission Rate: Max 9600Mbps for each 10G SFP+/SFP input
What are the outputs of the FUQ200A?
Output Level: -20dBm~+10dBm(87~117dBµV), 0.1dB stepping
Which modulation does the FUQ200A use?
Constellation: Bandwidth :8M
What is the RF output of the FUQ200A?
RF Range: 50~960MHz, 1kHz stepping
What power supply does the FUQ200A need?
General: Consumption: 50W(1 daughter QAM card)/75W(2 daughter QAM cards)
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- CAS & scrambling
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ200A
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.