2 photosFUQ200B QAM Modulator 256 IP Input 96 QAM Output
The Hanxing FUQ200B is an RF modulator in the FUQ2 line, built in our Guangzhou headend factory. Published specifications: Input Max 256*4 IP in through GE ports 1-4 Max; Input: Transmission Rate Max 960Mbps for each GE input. 19 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The FUQ-200B is our dense QAM modulator, outputting 48/96 non-adjacent DVB-C carriers from 2/4 RF ports. SFP+ and GE ports carry IP in and out. 1 (or 2) 48ch QAM cards each provide dual RF output ports to broaden QAM carrier bandwidth, and the modular 1U chassis is managed over the web. Broadcast operators use it for high-density signal distribution.
- Input
- Max 256*4 IP in through GE po…
- Input: Transmission Rate
- Max 960Mbps for each GE input
- Input: Transport Protocol
- TS over UDP/RTP
- Output Level
- -20dBm~+10dBm(87~117dBµV)
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ200B. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Input | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in through SFP+/SFP ports 1-3 |
|---|---|
| Input: Transmission Rate | Max 960Mbps for each GE input, and Max 9600Mbps for each 10G SFP+/SFP input |
| Input: Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
| Max PIDs Remapping | 256 per output channel |
| Functions | PID remapping (auto/manually optional) |
| Scrambling: Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 |
| Scrambling: Connection | Local/remote connection |
| Modulation Standard | EN300 429/ITU-T J.83A/B/C |
| Constellation | Constellation :16/32/6 4/128/256QAM |
| Symbol Rate | 3600~7000Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM) |
| FEC | RS (204, 188) |
| Interface (per card) | 2 F type output ports for 48 carriers, 75Ω Carrier 1~24 out thru RF1, 25~48 thru RF2 |
| RF Range | 50~960MHz, 1kHz stepping |
| Output Level | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| MER | ≥ 40dB |
| Per Daughter QAM U Card | 48 IP output over UDP/RTP/RTSP, 2*100/1000M self-adaption, Ethernet Ports, unicast/multicast IP 1~24 out thru Data1, IP 25~48 out thru Data2. |
| General: Demission | 420mm×440mm×44.5 mm (WxLxH) |
| General: Weight | 5kg |
| General: Consumption | 15.4W |
FUQ200B datasheet
Our full FUQ200B datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ200B compares
FUQ200B beside 3 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ200B this model | FUQ200B | FUQ200A | FUQ200E |
|---|---|---|---|---|
| Inputs | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in throug… | Max 512 IP in per card through SFP+/SFP ports 1-3 | Max 9600Mbps for each 10G SFP+/SFP input | Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE… |
| Outputs | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Modulation | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | Bandwidth :8M | EN300 429/ITU-T J.83A/B/C |
| Standard | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 |
| RF output | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping |
| Power | 15.4W | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz |
| Dimensions | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ200B — quick answers
Direct answers about the Hanxing FUQ200B: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ200B?
The FUQ-200B is our dense QAM modulator, outputting 48/96 non-adjacent DVB-C carriers from 2/4 RF ports.
What is the FUQ200B used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ200B, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ200B accept?
Input: Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in through SFP+/SFP ports 1-3
What are the outputs of the FUQ200B?
Output Level: -20dBm~+10dBm(87~117dBµV), 0.1dB stepping
Which modulation does the FUQ200B use?
Modulation Standard: EN300 429/ITU-T J.83A/B/C
Which standards does the FUQ200B support?
Scrambling: Scramble Standard: ETR289, ETSI 101 197, ETSI 103 197
What bit rate does the FUQ200B support?
Symbol Rate: 3600~7000Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM)
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- Broadcast headends
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ200B
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.