2 photosFUQ200E QAM Processor 112 Channels
The Hanxing FUQ200E is an RF modulator in the FUQ2 line, built in our Guangzhou headend factory. Published specifications: Input from Front Panel Max 512 IP in per card through SFP+/SFP ports; Input: Transmission Rate Max 9600Mbps for each 10G SFP+/SFP input. 18 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
Our Hanxing FUQ-200E 10G IP QAM processor combines multiplexer, scrambler and modulator functions in one box. Two card slots accept 32ch, 48ch or 64ch QAM cards, and the platform reaches up to 112 DVB-C QAM channels through 3 SFP+ (10G)/SFP (1G) ports and 2 GE ports. It sits in a 1U chassis with modular card slots and web-based network management. Cable television headends and broadcast systems deploy it for high-density processing.
- Input from Front Panel
- Max 512 IP in per card throug…
- Input from Daughter Card
- 2*512 IP in from 2 GE ports (…
- Input: Transmission Rate
- Max 9600Mbps for each 10G SFP…
- Input: Transport Protocol
- TS over UDP/RTP
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ200E. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| Input from Front Panel | Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE ports |
|---|---|
| Input from Daughter Card | 2*512 IP in from 2 GE ports (SFP port optional)--32/48 QAM |
| Input: Transmission Rate | Max 9600Mbps for each 10G SFP+/SFP input |
| Input: Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
| Max PIDs Remapping | 256 per output channel |
| Scrambling: Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 |
| Scrambling: Connection | Local/remote connection |
| Modulation Standard | EN300 429/ITU-T J.83A/B/C |
| QAM Channel | 32/48/64/96/112 non-adjacent carriers output, 384Mbps bandwidth for each RF port |
| Symbol Rate | 3600~7000Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM) |
| FEC | RS (204, 188) |
| RF Range | 50~960MHz, 1kHz stepping |
| Output Level | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Per Daughter QAM Card | 32/48/64 IP output over UDP/RTP/RTSP, unicast/multicast, through SFP+/SFP ports 1-3 or GE ports RJ45 |
| General: Dimension | 420mm×440mm ×44.5mm (WxLxH) |
| General: Temperature | 0~45℃ (operation), -20~80℃ (storage) |
| Power Supply | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz |
| General: Consumption | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) |
FUQ200E datasheet
Our full FUQ200E datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ200E compares
FUQ200E beside 3 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ200E this model | FUQ200B | FUQ200B | FUQ200A |
|---|---|---|---|---|
| Inputs | Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE… | Max 512 IP in per card through SFP+/SFP ports 1-3 | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in throug… | Max 9600Mbps for each 10G SFP+/SFP input |
| Outputs | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Modulation | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | Bandwidth :8M |
| Standard | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 |
| RF output | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping |
| Power | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | 15.4W | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) |
| Dimensions | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ200E — quick answers
Direct answers about the Hanxing FUQ200E: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ200E?
Our Hanxing FUQ-200E 10G IP QAM processor combines multiplexer, scrambler and modulator functions in one box.
What is the FUQ200E used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ200E, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ200E accept?
Input from Front Panel: Max 512 IP in per card through SFP+/SFP ports 1-3 and 2 GE ports
What are the outputs of the FUQ200E?
Output Level: -20dBm~+10dBm(87~117dBµV), 0.1dB stepping
Which modulation does the FUQ200E use?
Modulation Standard: EN300 429/ITU-T J.83A/B/C
Which standards does the FUQ200E support?
Scrambling: Scramble Standard: ETR289, ETSI 101 197, ETSI 103 197
What bit rate does the FUQ200E support?
Symbol Rate: 3600~7000Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM)
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- Cable TV
- Broadcast headends
- CAS & scrambling
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ200E
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.