2 photosFUQ200F QAM Processor Multiplexer Scrambler
The Hanxing FUQ200F is an RF modulator in the FUQ2 line, built in our Guangzhou headend factory. Published specifications: Input: Transmission Rate Max 9600Mbps for each 10G SFP+ input/Max; Input: Transport Protocol TS over UDP/RTP, unicast and multicast; Scrambling: Connection Local/remote connection. 21 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
Our FUQ-200F holds a multiplexer, scrambler and modulator in a 1U chassis with 3 card slots for QAM cards (32/48/64ch). IP inputs arrive over SFP+, SFP and GE ports, outputting up to 192 DVB-C QAM carriers. We load a 32ch, 48ch or 64ch card per slot and handle CAS encryption plus PSI/SI editing, all controlled over the web. Buyers use it for broadcast headends and cable TV systems needing high-density signal processing, where density keeps operator cost down.
- Input: Transmission Rate
- Max 9600Mbps for each 10G SFP…
- Input: Transport Protocol
- TS over UDP/RTP
- Output Level
- -20dBm~+10dBm(87~117dBµV)
- Modulation Standard
- EN300 429/ITU-T J.83A/B/C
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ200F. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| 112 | 192 |
|---|---|
| Input: Transmission Rate | Max 9600Mbps for each 10G SFP+ input/Max 960Mbps for each GE and SFP input |
| Input: Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 |
| Max PIDs Remapping | 256 per output channel |
| Functions | PID remapping (auto/ manually optional) |
| Scrambling: Scramble Standard | ETR289, ETSI 101 197, ETSI 103 197 |
| Scrambling: Connection | Local/remote connection |
| Modulation Standard | EN300 429/ITU-T J.83A/B/C |
| Constellation | Constellation :16/32/6 4/128/256QAM |
| Symbol Rate | 3600~7200Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM) |
| FEC | RS (204, 188) |
| Interface (per card) | 2 F type output ports for 32/48/64 carriers card, 75Ω. 32ch/48ch/64ch qam card : Carrier 1~16/1~24/1~32 out thru RF1, 17~32/25~48/33~64 thru RF2 |
| RF Range | 50~960MHz, 1kHz stepping |
| Output Level | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| General: Dimension | 480mm×440mm×44.5 mm (WxLxH) |
| General: Temperature | 0~45℃ (operation), -20~80℃ (storage) |
| General: Consumption | About 200W (3 daughter QAM cards) |
| DHP200D | DHP200E |
| Max 2 | Max 3 |
| 3 SFP+(10G)/SFP(1G) ports and 2 GE ports | 4 SFP+ (10G)/4 SFP(1G) ports and 12 GE ports |
| DepeFU on card spec | 2 SFP ports as input per card |
FUQ200F datasheet
Our full FUQ200F datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ200F compares
FUQ200F beside 3 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ200F this model | FUQ200B | FUQ200B | FUQ200A |
|---|---|---|---|---|
| Inputs | Max 9600Mbps for each 10G SFP+ input/Max 960Mbps for each G… | Max 512 IP in per card through SFP+/SFP ports 1-3 | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in throug… | Max 9600Mbps for each 10G SFP+/SFP input |
| Outputs | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Modulation | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C | Bandwidth :8M |
| Standard | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 |
| RF output | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping | 50~960MHz, 1kHz stepping |
| Power | About 200W (3 daughter QAM cards) | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | 15.4W | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) |
| Dimensions | 480mm×440mm×44.5 mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ200F — quick answers
Direct answers about the Hanxing FUQ200F: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ200F?
Our FUQ-200F holds a multiplexer, scrambler and modulator in a 1U chassis with 3 card slots for QAM cards (32/48/64ch).
What is the FUQ200F used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ200F, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ200F accept?
Input: Transmission Rate: Max 9600Mbps for each 10G SFP+ input/Max 960Mbps for each GE and SFP input
What are the outputs of the FUQ200F?
Output Level: -20dBm~+10dBm(87~117dBµV), 0.1dB stepping
Which modulation does the FUQ200F use?
Modulation Standard: EN300 429/ITU-T J.83A/B/C
Which standards does the FUQ200F support?
Scrambling: Scramble Standard: ETR289, ETSI 101 197, ETSI 103 197
What bit rate does the FUQ200F support?
Symbol Rate: 3600~7200Ksps, 1ksps stepping 5057Ksps (J.83B, 64QAM); 5361Ksps (J.83B, 256QAM)
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- Cable TV
- Broadcast headends
- CAS & scrambling
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ200F
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.