2 photosFUQ2500E Agile Modulator 1×CVBS Video 1×L-R Audio
The Hanxing FUQ2500E is an RF modulator in the FUQ2 line, built in our Guangzhou headend factory. Published specifications: Input level 1VPP; Output suppression ≥60dB (≥130dBuV testing); Interface 1 F typed output port, 75Ω. 24 parameters are published on this page from the model's own datasheet; quotations are factory-direct.
The Hanxing FUQ-2500E Agile Modulator covers 1 audio (L/R) input, 1 video (CVBS) input and configurable RF output. Video input AGC keeps the RF modulation stable across sources. The 19-inch 1U rack-mount chassis runs from keyboard and LCD, with online upgrade. Buyers use it for hotels, communities and entertainment venues.
- Input level
- 1VPP
- Output suppression
- ≥60dB (≥130dBuV testing)
- Interface
- 1 F typed output port
- Power requirements
- AC 90-264V
Send the channel count, input format and output standard — we reply with a model confirmation and factory-direct pricing.
Technical specifications
Taken from the datasheet we publish for the FUQ2500E. Every value below comes from our own specification document — ask us if you need a parameter that is not listed.
| A/V ration | -10~-20dB |
|---|---|
| Input level | 1VPP |
| Video clamping capacity | ≥26dB |
| Differential phase | ≤2° (Modulation 87.5%) |
| SNR | ≥50dB |
| Image carrier drift | ≤5kHz |
| 2T-K impulse ratio | ≤4% |
| Flatness in band | ≤1dB |
| Audio: Pre-emphasis of audio | 50µs |
| Audio: Input level | 0.7V |
| Audio: SNR | ≥60dB |
| Audio: Flatness in band | ≤1dB |
| Audio: Distortion degree | ≤0.5% |
| Audio modulation frequency offset | ± 50kHz |
| Audio: V/A interval | According to TV System standard |
| Interface | 1 F typed output port, 75Ω |
| Frequency range | 47~870MHz, 1kHz step |
| TV system standard | PAL B/G, PAL D/K, NTSC, SECAM |
| Error of video/audio carrier interval | ≤5 kHz |
| Carrier to noise ratio (C/N) | ≥62dB |
| Output suppression | ≥60dB (≥130dBuV testing) |
| Dimension(W×L×H) | 482*256*44mm |
| Environment | -10~45℃ (work), -20~80℃ (storage) |
| Power requirements | AC 90-264V, 50Hz |
FUQ2500E datasheet
Our full FUQ2500E datasheet (Word .docx, editable) — interfaces, formats, dimensions and power.
How the FUQ2500E compares
FUQ2500E beside 3 other Modulator / Modem models from the same Hanxing line, matched on the parameters they actually publish. Every cell repeats a value from the datasheet we publish for that model; a dash means we do not publish that parameter — ask us and we confirm it for the configuration you need.
| Parameter | FUQ2500E this model | FUQ200A | FUQ200B | FUQ200B |
|---|---|---|---|---|
| Inputs | 1VPP | Max 9600Mbps for each 10G SFP+/SFP input | Max 512 IP in per card through SFP+/SFP ports 1-3 | Max 256*4 IP in through GE ports 1-4 Max 256*3 IP in throug… |
| Outputs | ≥60dB (≥130dBuV testing) | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping | -20dBm~+10dBm(87~117dBµV), 0.1dB stepping |
| Modulation | ± 50kHz | Bandwidth :8M | EN300 429/ITU-T J.83A/B/C | EN300 429/ITU-T J.83A/B/C |
| Standard | PAL B/G, PAL D/K, NTSC, SECAM | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 | ETR289, ETSI 101 197, ETSI 103 197 |
| Power | AC 90-264V, 50Hz | 50W(1 daughter QAM card)/75W(2 daughter QAM cards) | AC 100V±10%, 50/60Hz; or AC 220V±10%, 50/60Hz | 15.4W |
| Dimensions | 482*256*44mm | 420mm×440mm×44.5 mm (WxLxH) | 420mm×440mm ×44.5mm (WxLxH) | 420mm×440mm×44.5 mm (WxLxH) |
Need a parameter that is missing above? Request the datasheet for the model you are evaluating — parameters are never estimated on this site.
FUQ2500E — quick answers
Direct answers about the Hanxing FUQ2500E: what it is, what it is typically used for, and the parameters we publish for it. Nothing here is estimated — where a value is not published, the answer says so rather than guessing.
What is the Hanxing FUQ2500E?
The Hanxing FUQ-2500E Agile Modulator covers 1 audio (L/R) input, 1 video (CVBS) input and configurable RF output.
What is the FUQ2500E used for in a DVB-T, DVB-C, QAM or ISDB-T network?
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
What is the price of the FUQ2500E, and how do I get a quote?
Hanxing builds this headend equipment in our own factory in Guangzhou, and it is offered for sale factory-direct. Send the channel count, the input format and the output standard you need, and we reply with the price, lead time and shipping options.
What inputs does the FUQ2500E accept?
Input level: 1VPP
What are the outputs of the FUQ2500E?
Output suppression: ≥60dB (≥130dBuV testing)
Which encoding formats does the FUQ2500E support?
Video clamping capacity: ≥26dB
Which modulation does the FUQ2500E use?
Audio modulation frequency offset: ± 50kHz
Which standards does the FUQ2500E support?
TV system standard: PAL B/G, PAL D/K, NTSC, SECAM
Typical use
Channel generation for DVB-T/C, ISDB-T, ATSC or QAM networks — local TV distribution, hospitality TV, and re-multiplexed regional line-ups.
- Hotels & hospitality
- Venues
More from this range
All Modulator / Modem models
Next stage in the chain
A modulator creates the channel; a transmitter decides how far that channel travels. Once the channel line-up is fixed, the transmitter stage sets output power, filtering and monitoring for the coverage area, which is why both stages are specified together rather than separately.
Get a quote for the FUQ2500E
Tell us the quantity, the input sources and the output standard you distribute. We confirm the configuration against the unit we build and come back with pricing, lead time and shipping options.